Partners Blog Contact Us

Articles in this section

VidyoReplay: Release Notes Archive

  • Updated
Follow

This archive contains the release notes for the VidyoReplay™ releases up to Version 22.3.0.

For the release notes from Version 23.x.x onwards, see Vidyo Release Notes.

 

2022 Releases

2021 Releases

2020 Releases

2019 Releases

2018 Releases

Compatibility

Known Issues

 

2022 Releases

VidyoReplay: About Version 22.3.0

What's new in this release

  • Ability to configure multiple Super users
    • Starting with VidyoReplay version 22.3.0, you can now configure more than one Super user. This feature:
      • Enables you to add users with Super permissions as well as edit and delete them.
      • Allows you to further strengthen the installation by maintaining more strict control over passwords for users with Super permissions.
    • A new Users tab on the VidyoReplay Super Admin interface provides access to this functionality. This tab shows the currently defined users, including their join date and status (enabled or disabled).
    • Please note: In clusters, the Users tab is only visible in the active controller.

      users-tab.png

      At the bottom of the page there are buttons that can Add a new user or Delete one or more selected users. Also, on mouse-over, you can edit information about an existing user.
    • Add new user
      • Once the user clicks on the Add button, a pop-up window opens, and information about the new user may be entered. All fields are mandatory, except for the Description field. By default (see associated checkbox), a new user is enabled. Upon clicking Save, the pop-up closes, the new user is added to the database and is then displayed in the list of users.
        add-user.jpg
    • Edit / modify user
      • In the Users page, one can see the mouse pointer changes from arrow to hand when mouse is over any of the users listed. Clicking on any of the users opens a pop-up window which enables editing. By default, one can change all fields but the password.
        edit-user.jpg
      • If the user checks the box “Change password” a pop-up displays the following fields:
        • Current user password – this is the password of the currently logged-in user.
        • Password and Confirm password fields – new password for the user.
        • After the Update button is pressed, the changes are stored in the database. If the password was changed, the user will be able to login with the new password if the user is enabled.
          edit-user-2.png
    • Delete user
      • It is possible to delete one or more users. Simply check the boxes on the left for the user(s) to delete and then press the Delete button. Once pressed, confirmation is provided. Users that are currently logged-in cannot be deleted.
        del-user.png
    • For information about how to add, edit, and delete Super users, refer to the “Configuring Multiple Super Users” section of the VidyoReplay Administrator Guide.
      • Note: Due to database changes required when there are multiple Super users, the procedure for upgrading an existing VidyoReplay cluster is different starting with VidyoReplay version 22.3.0. For more information, please see the “Upgrading Your VidyoReplay” section of the VidyoReplay Administrator Guide.
  • More options for downloading recordings via API
    • We’ve added a new parameter called “content” that enables you to have more fine-grained control when downloading recordings via the API.
      • For backwards compatibility, the old API invocations still work. You can use these for recordings made with profiles that do not have Per-Participant Audio Recordings or Advanced Options specified.
    • You should add the “content” parameter after the “file={recId}” parameter in the same way as any HTTP request.
    • Values supported for the “content” parameter are:
      • content=ppa — this parameter is useful for recordings made with profiles that have Per-Participant-Audio enabled. This option results in a ZIP archive containing all audio-only recordings, as well as a text file (meta.dat) that contains information about the audio files.
      • content=chat — this parameter is useful for recordings made with profiles that have “chatRecording:on” enabled in Advanced Options. This option results in a single text file that contains the chat from the recorded conference.
      • content=jpeg — this parameter can be used for any recording. This option results in a single JPEG file, which is the thumbnail displayed in the library for the recording.
      • content=mp4 — this parameter can be used on any recording. This option results in a single MP4 file. Use this parameter if the user wants to download only the recording regardless of the profile used in the recording.
      • content=all — This parameter can be used to download all content in a compressed file format (.zip) for all recording types.
    • Examples of usage:
      • Existing API:
        wget --auth-no-challenge --http-user=${User} --http-password=${Password} \ "http://${ReplayIP}/replay/downloadRecording.do?file=${recId}" -O Back_Compat.zip
      • Download only thumbnail (content=jpeg):
        wget --auth-no-challenge --http-user=${User} --http-password=${Password} \ "http://${ReplayIP}/replay/downloadRecording.do?file=${recId}&content=jpeg" -O recording.jpg
    • Notes:
      • The parameter “file=${recId}” is mandatory.
      • If any parameter is misspelled, an “HTTP error 500” will be returned.
      • For now, only one parameter of type “contents=…” is accepted. As a result, users who want to download chat contents and thumbnails will have to call the API download twice.

    Procedure for upgrading a VidyoReplay Cluster to 22.3.0

    Due to the database changes required for this new feature, the procedure for upgrading an existing Replay Cluster is the following:

    • Upgrade all recording nodes in the cluster. Note: You cannot login to recorder nodes until the entire cluster upgrade is completed.
    • Login to each controller and re-configure them as standalone.
    • Login to each standalone cluster and perform upgrade.
    • Login to the old active controller and reconfigure it in cluster mode. The machine will reboot. Check in the portal to see if the machine is properly registered.
    • Once registered, you can log in with the default user (‘super’). The Users tab should be visible. The Settings > Cluster > Component Status page should show the current machine as an active controller with all the recorders present.
    • Log in to the old standby controller and reconfigure it in cluster mode. The machine will reboot.
    • The active controller page (Settings > Cluster > Component Status) should now show the successful replication, and that both controllers are currently online.
    • It is now possible to log in via the UI on any machine in the cluster.

    Notes

    • It is recommended to take a snapshot of the machines using VidyoConsole, or via VMware if using a virtual machine.
    • It is mandatory to use the above procedure step-by-step. Failure to do so may result in unexpected results, including the inability to log in. In such cases, you can revert to a previous snapshot.
    • If a recorder node is reconfigured as standalone, the Users database is cleared and the default username/password combination may be used to log in.
    • If a controller is reconfigured as standalone, the Users database remains untouched.
    • With this new feature the database schema has changed. Old database backups should not be used!

    Files

    This file... Is for...
    rp-TAG_RP_22.3.0.33-bundle-v5628.vidyo
    		 VidyoReplay version 22.2.0 or later.

     

    Important notices

    • You must apply VidyoReplay version 22.3.0 on top of VidyoReplay version 22.2.0. If you have a VidyoReplay version earlier than 19.1.0, you must first upgrade to 19.1.0, then incrementally upgrade versions to version 22.3.0. Once you have done so, refer to the "Upgrading a VidyoReplay Cluster to 22.3.0" section below. These steps must be completed in order.
    • Multiple Super users can be managed only from Active Controller in a Vidyo Replay cluster.

    For more information on upgrading VidyoReplay from one version to another, refer to the Upgrade Steps Lookup Tool article. This article lists the steps you need to take for your particular version, including which Security Updates you may or may not need to install.

    Resolved issues

    The following table lists the issues we've resolved in VidyoReplay version 22.3.0:

    VidyoReplay Version 22.3.0 - Resolved Issues
    Key Summary
    VIDRPLY-72 We fixed an issue where the displayed name tag size would fluctuate for users during a call.
    VIDRPLY-71 An issue has been fixed where the screen wasn’t properly cleared after changing the video image from landscape to portrait.
    VIDRPLY-65 The Replay web user interface is no longer slow for Recorder nodes in cluster configuration.
    VIDRPLY-64 We fixed an issue where the “terminated by signal: 11 core created” message would display in logs when recording a conference.
    VIDRPLY-34 We fixed an issue where some of the available replay content could not be searched for by the use of the RecordsSearch API.
    VIDRPLY-23 The issue where the Replay UI would show additional info for the roomTenantName has been corrected so the recording is no longer prevented from playing.

    Known issues

    Refer to the Known Issues section below for the list of known issues for prior releases.
     

    Compatibility

    VidyoReplay version 22.3.0 is compatible with VidyoPortal versions 20.1.x and later.  

    If your organization has an on-premises VidyoPortal (rather than a cloud subscription), refer to the Vidyo Compatibility Matrix article to determine which endpoint versions are compatible with your VidyoReplay release.

     

    VidyoReplay: About Version 22.2.0

    What's new in this release

    • Record and save in-call chats
      • You can now record and save the chat messages from your VidyoConnect calls. When this feature is enabled, the chat messages are saved to a text file that you can download from the VidyoReplay Library.
      • To set this feature, the Super Admin must edit an existing profile and add "chatRecording:on" to the Advanced Options field on the VidyoReplay Recorder > Profiles page.

        Recorder_Profiles_chatRecordingON.jpg

        • We recommend using a profile name which identifies that the in-call chat will be recorded. For example, if you want to add chat recording to your Standard-Quality profile, you could name it "Standard-Quality-chat".
        • For more information about how to set this feature, refer to version 22.2.0 of the VidyoReplay Administrator Guide.
      • To use this feature, the call moderator must select the appropriate profile from the Record Profile drop-down on the VidyoConnect Control Meeting page Recording Options pop-up. (To access this pop-up, click the Record RecordButton.png button on the Control Meeting page.)

        RecordWebcast_StandardQualityChat.jpg

        • Once the profile is selected, an additional file is created during the recording. That file is a CSV file that contains the chat messages as well as other information, such as the timestamp, username, and internal ID. The file looks similar to this:

          RecordedChat_CSVfile.jpg

      • When a user downloads a recording that had the in-call chat recorded, they'll receive a ZIP file that contains the recorded call in MP4 format, a thumbnail image, and the CSV file containing the chat.
        • Note that the VidyoReplay Library doesn't provide any visual indication of which recordings include the chat messages and which don't.
    • Auto-delete webcasts
      • You can now delete your webcast recordings. When this feature is enabled, the webcast recording is not available in the VidyoReplay Library once the webcast finishes. Therefore, it cannot be viewed, played, searched, or downloaded.
        • To enable users who have slow connections to view the entire webcast, the recording does remain available for about 30 seconds after the webcast ends.
      • To set this feature, the Super Admin must edit an existing profile and add "deleteWebcast:on" to the Advanced Options field on the VidyoReplay Recorder > Profiles page.

        Recorder_Profiles_deleteWebcastON.jpg

        • We recommend using a profile name which identifies that the webcast will be deleted at the end of the call. For example, if you want to add auto-deletion of webcasts to your Standard-Quality profile, you could name it "Standard-Quality-delete".
        • For more information about how to set this feature, refer to version 22.2.0 of the VidyoReplay Administrator Guide.
      • To use this feature, the call moderator must select the appropriate profile from the Record Profile drop-down on the VidyoConnect Control Meeting page Recording Options pop-up. (To access this pop-up, click the Record RecordButton.png button on the Control Meeting page.)
        • One of the following then occurs depending on whether the call moderator selects Record or Record & Webcast from the Recording Options pop-up:
          • If the call moderator selects Record, the call is recorded, but the recording is deleted at the end of the call.

            RecordWebcast_StandardQualityDelete.jpg

        • If the call moderator selects Record & Webcast, the call is recorded and a webcast link is provided. The moderator can then share the link. Anyone who has access to the link can view the webcast, but the recording is deleted at the end of the call.  
    • Send email notifications when the NAS is unmounted
      • VidyoReplay can now send you an email notification if your NAS unmounts. This feature allows you to get alerted quickly, thereby preventing issues that could occur if your NAS unmounts without your knowledge.
      • To set email notifications, add an email address to the Notification Email From and Notification Email To fields on the VidyoReplay Settings > General page.

        EmailNotificationReplay.jpg
    • Changes to API downloads
      • This release changes the API download functionality so that a recording that has additional files associated with it can be downloaded as a ZIP archive.
      • The new API call for downloading the recording as well as its additional files as a ZIP archive is: 
        wget --auth-no-challenge --http-user=${USR} --http-password=${PWD}\
          "http://${REP}/replay/downloadRecording.do?file=${rec}&fileFormat=zip"-O .zip
        Where: 
        • ${USR} is the username to be used in the HTTP request
        • ${PWD} is the password
        • ${REP} is the FDQN or IP of the VidyoReplay machine
        • ${rec} is the unique internal ID of the recording
        • &fileFormat=zip is the option needed to download all the files associated with a recording
          Note: For backwards compatibility reasons, if &fileFormat=zip is not used, the standard API download is initiated where only the recording (in MP4 format) is downloaded.

    Files 

    This file... Is for...
    rp-TAG_RP_22.2.0.23-bundle-v5522.vidyo
    		 VidyoReplay version 22.2.0 or later

     

    Important notices

    • You must apply VidyoReplay version 22.2.0 on top of VidyoReplay version 22.1.0. If you have a VidyoReplay version earlier than 19.1.0, you must first upgrade to 19.1.0, then upgrade to 22.2.0. Once you have done so, refer to the "Upgrading a VidyoReplay Cluster to 22.2.0" section below. These steps must be completed in order.  
    • IMPORTANT NOTE: In order to support HTML5 playback, when you upgrade to VidyoReplay 22.2.0, your existing recordings undergo an automatic conversion process. It takes approximately 30 seconds to convert an hour-long video. During the conversion process:
      • Recordings that are in the queue to be converted cannot be played back via the web interface.
      • Recordings are available for download.
      • New recordings can be made; however, as the number of recordings in progress increases, the automatic conversion process may slow down.
    • Enghouse Vidyo highly recommends upgrading to VidyoReplay 22.2.0 during a period of expected low usage to allow the conversion process to complete.

    Upgrading a VidyoReplay cluster to 22.2.0

    To upgrade a VidyoReplay cluster to 22.2.0, you must perform the following steps in order: 

    1. Place all Cluster Nodes into Maintenance mode.
    2. Upgrade all the Cluster Nodes.
    3. When the Cluster Node upgrades are completed and back online, upgrade the current Standby Controller.
    4. When the Standby Controller upgrade is complete, upgrade the Active Controller.
      The previous Standby Controller will now become the 22.2.0 Active Controller.
    5. When the former Active Controller completes its upgrade, it will then become the 22.2.0 Standby Controller.

      If you do not perform the above steps in order, there will be cluster instability and/or configuration loss.

    For more information on upgrading VidyoReplay from one version to another, refer to the Upgrade Steps Lookup Tool article. This article lists the steps you need to take for your particular version, including which Security Updates you may or may not need to install.

    Resolved issues

    The following table lists the issues we've resolved in VidyoReplay version 22.2.0:

    VidyoReplay Version 22.2.0 - Resolved Issues
    Key Summary
    VIDRPLY-50 When sharing recorded content to a user on a mobile device, if the mobile user rotates their device, the label size for the shared content, as well as the label size for the sharing participant, now appear as the correct size.
    VIDRPLY-26 When a call that is recorded with the “Per Participant Audio” profile is downloaded, extra ZIP files are no longer created for each download.
    VIDRPLY-25
    and
    RPLY-1465    		 An issue that caused some recordings to erroneously appear on the VidyoData partition has been resolved.
    RPLY-1534 An issue was fixed where the VidyoReplay recording would display a "No camera" icon even when there were still video-enabled participants in the call. This occurred when VidyoReplay received a client resolution that had an odd width or height. In this release, when an odd client resolution is received, VidyoReplay will normalize it. The "source image normalized to X lines" message will also be logged.
    RPLY-1518 An issue that caused duplicate record IDs in the recording database has been resolved.

    Known issues

    Refer to the Known Issues section below for the list of known issues for prior releases.
     

    Compatibility

    VidyoReplay version 22.2.0 is compatible with VidyoPortal versions 20.1.x and later.  

    If your organization has an on-premises VidyoPortal (rather than a cloud subscription), refer to the Vidyo Compatibility Matrix article to determine which endpoint versions are compatible with your VidyoReplay release.

     

    VidyoReplay: About Version 22.1.1

    What's new in this release

    • Fix for "No camera" icon issue 
      • This release fixes an issue where the VidyoReplay recording would display a "No camera" icon even when there were still video-enabled participants in the call. This occurred when VidyoReplay received a client resolution that had an odd width or height. In this release, when an odd client resolution is received, VidyoReplay will normalize it.
        • VidyoReplay will also log the error with the "source image normalized to X lines" message so customers are aware when this occurs.

    Files 

    This file... Is for...
    rp-TAG_RP_22_1_1_0.signed.vidyo
    		 VidyoReplay version 21.1.0 or later

     

    Important notices

    • You must apply VidyoReplay version 22.1.1 on top of VidyoReplay version 22.1.0. If you have a VidyoReplay version earlier than 19.1.0, you must first upgrade to 19.1.0, then upgrade to 22.1.0, and then upgrade to version 22.1.1. Once you have done so, refer to the "Upgrading a VidyoReplay Cluster to 22.1.1" section below. These steps must be completed in order.  
    • IMPORTANT NOTE: In order to support HTML5 playback, when you upgrade to VidyoReplay 22.1.1, your existing recordings undergo an automatic conversion process. It takes approximately 30 seconds to convert an hour-long video. During the conversion process:
      • Recordings that are in the queue to be converted cannot be played back via the web interface.
      • Recordings are available for download.
      • New recordings can be made; however, as the number of recordings in progress increases, the automatic conversion process may slow down.
    • Enghouse Vidyo highly recommends upgrading to VidyoReplay 22.1.1 during a period of expected low usage to allow the conversion process to complete.

    Upgrading a VidyoReplay cluster to 22.1.1

    To upgrade a VidyoReplay cluster to 22.1.1, you must perform the following steps in order: 

    1. Place all Cluster Nodes into Maintenance mode.
    2. Upgrade all the Cluster Nodes.
    3. When the Cluster Node upgrades are completed and back online, upgrade the current Standby Controller.
    4. When the Standby Controller upgrade is complete, upgrade the Active Controller.
      The previous Standby Controller will now become the 22.1.1 Active Controller.
    5. When the former Active Controller completes its upgrade, it will then become the 22.1.1 Standby Controller.

      If you do not perform the above steps in order, there will be cluster instability and/or configuration loss.

    For more information on upgrading VidyoReplay from one version to another, refer to the Upgrade Steps Lookup Tool article. This article lists the steps you need to take for your particular version, including which Security Updates you may or may not need to install.

    Resolved issues

    The following table lists the issue we've resolved in VidyoReplay version 22.1.1:

    VidyoReplay Version 22.1.1 - Resolved Issue
    Key Summary
    RPLY-1534 When VidyoReplay Version 22.1.1 receives a client resolution that has an odd width or height, it will normalize it. It will also log the error with this message: "source image normalized to X lines".

    Known issues

    Refer to the Known Issues section below for the list of known issues for prior releases.
     

    Compatibility

    VidyoReplay version 22.1.1 is compatible with VidyoPortal versions 20.1.x or later. 

    If your organization has an on-premises VidyoPortal (rather than a cloud subscription), refer to the Vidyo Compatibility Matrix article to determine which endpoint versions are compatible with your VidyoReplay release.

     

    VidyoReplay: About Version 22.1.0

    What's new in this release

    • Per-participant audio recording
      • This feature enables each participant in a recorded conference to have a separate audio-only file of the conference. As always, only one video recording of the conference is produced.  
        • An additional directory is created in the file system that contains the per-participant audio-only recordings.
        • You can choose to create MPEG audio-only files that use the AAC codec or WAV audio-only files that use the PCM codec. The AAC option requires more CPU, but the resulting audio-only files are small; the WAV option uses less CPU but results in about 10.5 MB of storage for each recorded minute.
    • VidyoReplay reboots for configuration changes
      • Any configuration changes made with the VidyoReplay Super Admin interface now causes the VidyoReplay to reboot, thereby ensuring that your changes are applied. 
    • Resolved issues
      • This release fixes a number of issues to enhance the reliability and usability of VidyoReplay. For more details, see the "Resolved Issues" section below.
    • System updates
      • For added security and stability, updates for multiple third-party packages and libraries are included as part of this release.

    Files 

    This file... Is for...
    rp-TAG_RP-22.1.0.42-bundle-v5298.vidyo
    		 VidyoReplay version 21.2.0 or later

     

    Important notices

    • You must upgrade to VidyoReplay version 22.1.0 from VidyoReplay version 19.1.0. or later. If you have a VidyoReplay version earlier than 19.1.0, you must first upgrade to 19.1.0 and then upgrade to version 22.1.0.  Once you have done so, refer to the "Upgrading a VidyoReplay Cluster to 22.1.0" section below. These steps must be completed in order.  
    • IMPORTANT NOTE: In order to support HTML5 playback, when you upgrade to VidyoReplay 22.1.0, your existing recordings undergo an automatic conversion process. It takes approximately 30 seconds to convert an hour-long video. During the conversion process:
      • Recordings that are in the queue to be converted cannot be played back via the web interface.
      • Recordings are available for download.
      • New recordings can be made; however, as the number of recordings in progress increases, the automatic conversion process may slow down.
    • Enghouse Vidyo highly recommends upgrading to VidyoReplay 22.1.0 during a period of expected low usage to allow the conversion process to complete.

    Upgrading a VidyoReplay cluster to 22.1.0

    To upgrade a VidyoReplay cluster to 22.1.0, you must perform the following steps in order: 

    1. Place all Cluster Nodes into Maintenance mode.
    2. Upgrade all the Cluster Nodes.
    3. When the Cluster Node upgrades are completed and back online, upgrade the current Standby Controller.
    4. When the Standby Controller upgrade is complete, upgrade the Active Controller.
      The previous Standby Controller will now become the 22.1.0 Active Controller.
    5. When the former Active Controller completes its upgrade, it will then become the 22.1.0 Standby Controller.

      If you do not perform the above steps in order, there will be cluster instability and/or configuration loss.

    For more information on upgrading VidyoReplay from one version to another, refer to the Upgrade Steps Lookup Tool article. This article lists the steps you need to take for your particular version, including which Security Updates you may or may not need to install.

    Resolved issues

    The following table lists the issues we've resolved in VidyoReplay version 22.1.0:

    VidyoReplay Version 22.1.0 - Resolved Issues
    Key Summary
    RPLY-1481 The VidyoReplay RecordingSearch API now returns the proper file size.
    RPLY-1449 When a portrait camera becomes the primary tile, the previous 16:9 frame is no longer visible behind that tile. 
    RPLY-1447 If no video sources are available, the meeting content is not recorded.
    RPLY-1441 Using the “@” symbol in the password field for the recorder component caused the recorder to go down; therefore, the “@” symbol is no longer permitted in the password field.
    RPLY-1319 An issue that caused a crash when downloading large video files has been resolved. 
    RPLY-1201 Audio-only call recordings are now visible on the Recorder > Call Status page. 

    Known issues

    Refer to the Known Issues section below for the list of known issues for prior releases.
     

    Compatibility

    VidyoReplay version 22.1.0 is compatible with VidyoPortal versions 20.1.x or later. 

    If your organization has an on-premises VidyoPortal (rather than a cloud subscription), refer to the Vidyo Compatibility Matrix article to determine which endpoint versions are compatible with your VidyoReplay release.

    2021 Releases

     

    VidyoReplay: About Version 21.2.0

    What's new in this release

    • MP4 video format replacing FLV video format
      • Starting with this release, VidyoReplay will use the MP4 video format instead of the FLV (Flash Video File) format.
      • Why did we switch to MP4?
        • Higher quality video and less potential for loss of quality when files are compressed.
        • Better compatibility with various platforms and devices, including compatibility with Windows, Mac, Android, and iOS.
        • MP4 file playback is smoother on various devices.
        • No need for plug-ins or codecs to enable the MP4 files to be played.
    • Support for iOS playback
      • VidyoReplay can now stream or play back videos on iOS devices.
    • Resolved issues 
      • This release fixes a number of issues to enhance the reliability and usability of VidyoReplay. For more details, see the "Resolved Issues" section below. 
    • System updates 
      • For added security and stability, updates for multiple third-party packages and libraries are included as part of this release.

    Files 

    This file... Is for...
    rp-TAG_RP_21_2_0_031-bundle-v4739-signed.vidyo
    		 VidyoReplay version 20.2.0 or later

     

    Important notices

    • You must upgrade to VidyoReplay version 21.2.0 from VidyoReplay version 19.1.0. or later. If you have a VidyoReplay version earlier than 19.1.0, you must first upgrade to 19.1.0 and then upgrade to version 21.2.0.  Once you have done so, refer to the "Upgrading a VidyoReplay Cluster to 21.2.0" section below. These steps must be completed in order.  
    • IMPORTANT NOTE: In order to support HTML5 playback, when you upgrade to VidyoReplay 21.2.0, your existing recordings undergo an automatic conversion process. It takes approximately 30 seconds to convert an hour-long video. During the conversion process:
      • Recordings that are in the queue to be converted cannot be played back via the web interface.
      • Recordings are available for download.
      • New recordings can be made; however, as the number of recordings in progress increases, the automatic conversion process may slow down.
    • Enghouse Vidyo highly recommends upgrading to VidyoReplay 21.2.0 during a period of expected low usage to allow the conversion process to complete.

    Upgrading a VidyoReplay cluster to 21.2.0

    To upgrade a VidyoReplay cluster to 21.2.0, you must perform the following steps in order: 

    1. Place all Cluster Nodes into Maintenance mode.
    2. Upgrade all the Cluster Nodes.
    3. When the Cluster Node upgrades are completed and back online, upgrade the current Standby Controller.
    4. When the Standby Controller upgrade is complete, upgrade the Active Controller.
      The previous Standby Controller will now become the 21.2.0 Active Controller.
    5. When the former 20.2.x Active Controller completes its upgrade, it will then become the 21.2.0 Standby Controller.

      If you do not perform the above steps in order, there will be cluster instability and/or configuration loss.

    For more information on upgrading VidyoReplay from one version to another, refer to the Upgrade Steps Lookup Tool article. This article lists the steps you need to take for your particular version, including which Security Updates you may or may not need to install.

    Resolved issues

    The following table lists the issues we've resolved in VidyoReplay version 21.2.0:

    VidyoReplay Version 21.2.0 - Resolved Issues
    Key Summary
    RPLY-1427 Shared applications can now be recorded with the default SD profile. 
    RPLY-1279 Recordings made with iOS devices can now be played back with VidyoReplay.
    RPLY-597 When recording a conference with two participants in which one participant has privacy mode enabled, a still image of the participant who does not have privacy mode enabled no longer remains in the recording after the participants disconnect.
    RPLY-595 A black screen no longer displays when playing back recordings that are under 10 seconds long.
    RPLY-1389 Fixed an issue where the "no camera" icon is displayed for several seconds before a content share starts.
    RPLY-1413  Fixed an issue where the Active Speaker was not displaying reliably in  a recording.

    Known issues

    Refer to the Known Issues section below for the list of known issues for prior releases.
     

    Compatibility

    VidyoReplay version 21.2.0 is compatible with VidyoPortal versions 20.1.x or later. 

    If your organization has an on-premises VidyoPortal (rather than a cloud subscription), refer to the Vidyo Compatibility Matrix article to determine which endpoint versions are compatible with your VidyoReplay release.

     

    VidyoReplay: About Version 21.1.0

    What's new in this release

    • Resolved issues 
      • This release fixes a number of issues to enhance the reliability and usability of VidyoReplay. For more details, see the "Resolved Issues" section below. 
    • System updates 
      • For added security and stability, updates for multiple third-party packages and libraries are included as part of this release.
    • Experimental feature: Automatic Recording Export
      • The Automatic Recording Export feature allows a VidyoReplay administrator to automatically copy all their recordings to an external location with optional customizable third-party metadata.

    Files 

    This file... Is for...
    rp-TAG_RP_21_1_0_008-bundle-v3929-signed.vidyo
    		 VidyoReplay version 20.2.0 or later

     

    Important notices

    • You must upgrade to VidyoReplay version 21.1.0 from VidyoReplay version 19.1.0. or later. If you have a VidyoReplay version earlier than 19.1.0, you must first upgrade to 19.1.0 and then upgrade to version 21.1.0.  Once you have done so, refer to the "Upgrading a VidyoReplay Cluster to 21.1.0" section below. These steps must be completed in order.  
    • IMPORTANT NOTE: In order to support HTML5 playback, when you upgrade to VidyoReplay 21.1.0, your existing recordings undergo an automatic conversion process. It takes approximately 30 seconds to convert an hour-long video. During the conversion process:
      • Recordings that are in the queue to be converted cannot be played back via the web interface.
      • Recordings are available for download.
      • New recordings can be made; however, as the number of recordings in progress increases, the automatic conversion process may slow down.
    • Enghouse Vidyo highly recommends upgrading to VidyoReplay 21.1.0 during a period of expected low usage to allow the conversion process to complete.

    Upgrading a VidyoReplay cluster to 21.1.0

    To upgrade a VidyoReplay cluster to 21.1.0, you must perform the following steps in order: 

    1. Place all Cluster Nodes into Maintenance mode.
    2. Upgrade all the Cluster Nodes.
    3. When the Cluster Node upgrades are completed and back online, upgrade the current Standby Controller.
    4. When the Standby Controller upgrade is complete, upgrade the Active Controller.
      The previous Standby Controller will now become the 21.1.0 Active Controller.
    5. When the former 20.2.x Active Controller completes its upgrade, it will then become the 21.1.0 Standby Controller.

      If you do not perform the above steps in order; there will be cluster instability and/or configuration loss.

    For more information on upgrading VidyoReplay from one version to another, refer to the Upgrade Steps Lookup Tool article. This article lists the steps you need to take for your particular version, including which Security Updates you may or may not need to install.

    Resolved issues

    The following table lists the resolved issues in VidyoReplay version 21.1.0:

    VidyoReplay Version 21.1.0 - Resolved Issues
    Key Summary
    RPLY-1371 If a participant mutes their microphone or remains silent for an extended period, their audio is now recorded when they start speaking. 
    RPLY-1337 Display names that use Korean characters no longer appear garbled.
    RPLY-1342 The NAS status now properly updates even when the mount is lost.

    Known issues

    Refer to the Known Issues section below for the list of known issues for prior releases.
     

    Compatibility

    VidyoReplay version 20.2.1 is compatible with VidyoPortal versions 18.4.x or later. 

    If your organization has an on-premises VidyoPortal (rather than a cloud subscription), refer to the Vidyo Compatibility Matrix article to determine which endpoint versions are compatible with your VidyoReplay release.

     

    VidyoReplay: About Version 20.2.1

    What's new in this release

    • Resolved Issues 
      • This release fixes a number of issues to enhance the reliability and usability of VidyoReplay. For more details, see the "Resolved Issues" section below. 

    Files 

    This file... Is for...
    rp-TAG_RP_20_2_1_014-bundle-v3519-signed.vidyo
    		 VidyoReplay version 19.1.0 or later

     

    Important notices

    • You must upgrade to VidyoReplay version 20.2.1 from VidyoReplay version 19.1.0. or later. If you have a VidyoReplay version earlier than 19.1.0, you must first upgrade to 19.1.0 and then upgrade to version 20.2.1.  Once you have done so, refer to the "Upgrading a VidyoReplay Cluster to 20.2.1" section below to upgrade to VidyoReplay version 20.2.1. These steps must be completed in order.  
    • IMPORTANT NOTE: In order to support HTML5 playback, when you upgrade to VidyoReplay 20.2.1, your existing recordings undergo an automatic conversion process. It takes approximately 30 seconds to convert an hour-long video. During the conversion process:
      • Recordings that are in the queue to be converted cannot be played back via the web interface.
      • Recordings are available for download.
      • New recordings can be made; however, as the number of recordings in progress increases, the automatic conversion process may slow down.
    • Enghouse Vidyo highly recommends to upgrading to VidyoReplay 20.2.1 during a period of expected low usage to allow the conversion process to complete.

    Upgrading a VidyoReplay cluster to 20.2.1

    To upgrade a VidyoReplay cluster to 20.2.1, you must perform the following steps in order: 

    1. Place all Cluster Nodes into Maintenance mode.
    2. Upgrade all the Cluster Nodes.
    3. When the Cluster Node upgrades are completed and back online, upgrade the current Standby Controller.
    4. When the Standby Controller upgrade is complete, upgrade the Active Controller.
      The previous Standby Controller will now become the 20.2.1 Active Controller.
    5. When the former 20.1.0 Active Controller completes its upgrade, it will then become the 20.2.1 Standby Controller.

      If you do not perform the above steps in order; there will be cluster instability and/or configuration loss.

    For more information on upgrading VidyoReplay from one version to another, refer to the Upgrade Steps Lookup Tool article. This article lists the steps you need to take for your particular version, including which Security Updates you may or may not need to install.

    Resolved issues

    The following table lists the resolved issues in VidyoReplay version 20.2.1:

    VidyoReplay Version 20.2.1 - Resolved Issues
    Key Summary
    RPLY-1355 To prevent unregistered prefixes after a VidyoPortal failover, VidyoReplay now attempts to register prefixes multiple times when the gateway restarts.
    RPLY-1351 Post-processing of missing recording files no longer keeps trying indefinitely.
    RPLY-1317 If a call is configured with 4 as the maximum number of participants to display but more than four participants join the call, the call recording now correctly displays only four video tiles.
    RPLY-1308  If a participant who was not previously displayed during the call starts speaking, that participant and subsequent speakers now display properly in the largest panel of the recording.
    RPLY-1303 When a recording is started in an empty room, the "No Camera" icon is now displayed on the recording until the first participant joins and shares video.
    RPLY-1297 When a user jumps ahead of the buffering part of a recording, they no longer get stuck in a state where the recording keeps loading, but now successfully view the recorded content. 

     

    Known issues

    Refer to the Known Issues section below for the list of known issues for prior releases.
     

    Compatibility

    VidyoReplay version 20.2.1 is compatible with VidyoPortal versions 18.4.x or later. 

    If your organization has an on-premises VidyoPortal (rather than a cloud subscription), refer to the Vidyo Compatibility Matrix article to determine which endpoint versions are compatible with your VidyoReplay release.

     

    2020 Releases

     

    VidyoReplay: About Version 20.2.0

    What's New in This Release

    • HTML5 Player Replacing Flash® Player
      • Starting with this release, VidyoReplay will use an HTML5 player instead of a Flash player to play videos.
      • Why did we switch to HTML5?
        • Flash-based streaming is now being deprecated on most major browsers, and after 2020, it will become blocked by default.
        • All modern, popular browsers support HTML5 videos (including Chrome™, Firefox®, Safari®, and more). Unlike with Flash, you do not have to install any browser plugin or video player. Your browser is your player.
        • HTML5 is lightweight, fast, and takes less CPU time to render content than Flash does.
        • Platforms and browsers that support HTML5 Player:
          Compatible Platforms Compatible Browsers
          Windows® 10
          • Google Chrome version 87
          • Microsoft Edge version 87.0 
          Mac OS 13
          • Safari version 13.1
          • Firefox version 83
    • Ability to Enable and Disable Audio-Only Avatars
      • You now have the ability to enable or disable the avatar that displays when a participant has their video source muted (only when the participant is in audio-only mode).
        • When enabled, if a participant’s video source is muted during a call, an avatar with the first three letters of their name appears on their tile. 
        • When disabled, if a participant’s video source is muted during a call, their video tile does not display at all. 
      • You can easily configure this setting using the new "Use Avatar" checkbox on the Recorder > Configuration page.

        Avatarcheckbox.jpg
    • New Icon to Indicate When All Participants Have Muted Video
      • When all the participants in a video call have their video sources muted, this icon now appears on the full screen:

        AllParticipantsMutedIcon_NotFullScreen.jpg

      • This icon lets you know that the reason you’re not seeing video is because the participants have chosen not to display it rather than because of a video problem.
    • Audio Quality Improvements
      • We've added support for recordings of up to 48 kHz.
    • System Updates
      • For added security and stability, updates for multiple third-party packages and libraries are included as part of this release.
    • Resolved Issues 
      • In this release, we've resolved a number of issues for improved stability and usability. To learn more, refer to the Resolved Issues section below. 

    Files 

    This file... Is for...
    rp-TAG_RP_20.2.0.034-bundle-v3059.vidyo
    		 VidyoReplay version 19.1.0

     

    Important Notices

    • You must upgrade to VidyoReplay version 20.2.0 from VidyoReplay version 19.1.0. If you have a VidyoReplay version earlier than 19.1.0, you must first upgrade to 19.1.0 and then upgrade to version 20.2.0.  Once you have done so, refer to the "Upgrading a VidyoReplay Cluster to 20.2.0" section below to upgrade to VidyoReplay version 20.2.0. These steps must be completed in order.  
    • IMPORTANT NOTE: In order to support HTML5 playback, when you upgrade to VidyoReplay 20.2.0, your existing recordings undergo an automatic conversion process. It takes approximately 30 seconds to convert an hour-long video. During the conversion process:
      • Recordings that are in the queue to be converted cannot be played back via the web interface.
      • Recordings are available for download.
      • New recordings can be made; however, as the number of recordings in progress increases, the automatic conversion process may slow down.
    • Enghouse Vidyo highly recommends to upgrading to VidyoReplay 20.2.0 during a period of expected low usage to allow the conversion process to complete.

    Upgrading a VidyoReplay Cluster to 20.2.0

    To upgrade a VidyoReplay cluster to 20.2.0, you must perform the following steps in order: 

    1. Place all Cluster Nodes into Maintenance mode.
    2. Upgrade all the Cluster Nodes.
    3. When the Cluster Node upgrades are completed and back online, upgrade the current Standby Controller.
    4. When the Standby Controller upgrade is complete, upgrade the Active Controller.
      The previous Standby Controller will now become the 20.2.0 Active Controller.
    5. When the former 20.1.0 Active Controller completes its upgrade, it will then become the 20.2.0 Standby Controller.

      If you do not perform the above steps in order; there will be cluster instability and/or configuration loss.

    For more information on upgrading VidyoReplay from one version to another, refer to the Upgrade Steps Lookup Tool article. This article lists the steps you need to take for your particular version, including which Security Updates you may or may not need to install.

    Resolved Issues

    The following table lists the resolved issues in VidyoReplay version 20.2.0:

    VidyoReplay Version 20.2.0 - Resolved Issues
    Key Summary
    RPLY-1283 Enghouse Vidyo fixed an issue where a recording participant’s display name was getting wrapped if it included only multi-byte characters, such as those in Chinese and Japanese languages.
    RPLY-1248 The "Conference and Application" profile is now available for SD resolution as well as for FHD and HD resolutions. 
    RPLY-1247 Enghouse Vidyo fixed an issue where voice recordings were garbled for audio-only calls that had more than two participants. 
    RPLY-1238  Enghouse Vidyo fixed an issue where the last few seconds of a recording sometimes did not play back. 
    RPLY-1237  Enghouse Vidyo fixed an issue where recordings showed a participant’s display name as garbled characters if that participant’s name was not in English text. 
    RPLY-1230  Enghouse Vidyo fixed an issue where VidyoReplay could not mount the NAS if ICMP to the NAS was not open. 

     

    Known Issues

    Refer to the Known Issues section below for the list of known issues for this and prior releases.
     

    Compatibility

    VidyoReplay version 20.2.0 is compatible with VidyoPortal versions 18.4.x or later. 

    If your organization has an on-premises VidyoPortal (rather than a cloud subscription), refer to the Vidyo Compatibility Matrix article to determine which endpoint versions are compatible with your VidyoReplay release.

     

    VidyoReplay: About Version 20.1.0

    What's New in This Release

    • OPUS Support with VidyoConnect™ 
      • When registering to the VidyoPortal™, the VidyoReplay checks the system's capabilities, and then one of the following occurs:
        • If the VidyoPortal supports Opus audio, the VidyoReplay configures itself to use Opus audio on the SVC side so when a VidyoReplay recorder joins a VidyoConnect call, the conference continues to use Opus. 
        • If the VidyoPortal does not support Opus audio, the VidyoReplay configures itself to use SPEEX/RED on the SVC side for the recorder. 
    • Record for Up to Twelve Hours
      • You can now record for up to twelve hours continuously.
    • Content Share Recording Profiles Are Supported for CIF Resolution
      • VidyoReplay supports recording shared content at CIF resolution.
    • "Conference & Application" Recording Mode Supported for HD1080 Resolution
      • VidyoReplay supports the "Conference & Application" recording mode when recording a conference in Full HD 1080p resoluti
    • Resolved Issues 
      • In this release, we've resolved a number of issues for improved stability and usability. To learn more, refer to the "Resolved Issues" section below. 

    Files 

    This file... Is for...
    rp-TAG_RP_20-1-0-012.tar.xz-signed.vidyo VidyoReplay version 19.1.0

     

    Important Notices

    • You must upgrade to VidyoReplay version 20.1.0 from VidyoReplay version 19.1.0. Therefore, if you have a VidyoReplay version earlier than 19.1.0, you must first upgrade to 3.1.5 (03) and then upgrade to version 19.1.0. Once you have done so, refer to the "Upgrade a VidyoReplay 19.1.0 Cluster to 20.1.0" section below to upgrade from VidyoReplay 19.1.0 to version 20.1.0. These steps must be completed in order.  
    • IMPORTANT NOTE: If you have installed a previous VidyoReplay version 20.1.0 beta, you should first downgrade your VidyoReplay to 19.1.0, and then upgrade directly to the GA 20.1.0 version.
    • Before upgrading, please review the Notable Changes in Version 20.1.0 section for additional changes between VidyoReplay version 19.1.0 and 20.1.0. 

    Upgrade a VidyoReplay 19.1.0 Cluster to 20.1.0

    To upgrade a 19.1.0 cluster to 20.1.0, you must perform the following steps in order: 

    1. Place all Cluster Nodes into Maintenance mode.
    2. Upgrade all the Cluster Nodes.
    3. When the Cluster Node upgrades are completed and back online, upgrade the current Standby Controller.
    4. When the Standby Controller upgrade is complete, upgrade the Active Controller.
      The previous Standby Controller will now become the 20.1.0 Active Controller.
    5. When the former 19.1.0 Active Controller completes its upgrade, it will then become the 20.1.0 Standby Controller.

      If you do not perform the above steps in order; there will be cluster instability and/or configuration loss.

    For more information on upgrading VidyoReplay from one version to another, refer to the Upgrade Steps Lookup Tool article. This article lists the steps you need to take for your particular version, including which Security Updates you may or may not need to install.

    Notable Changes in Version 20.1.0 

    The following list includes other notable changes for VidyoReplay version 20.1.0:

    • Content Share Recording Profiles are Supported for CIF Resolution
      • VidyoReplay once again supports recording shared content at CIF resolution.   
    • "Conference & Application" Recording Mode Supported for HD1080 Resolution
      • When recording a conference in Full HD 1080p resolution, VidyoReplay once again supports the "Conference & Application" recording mode.

    For more Notable Changes from previous releases, refer to the Notable Changes section.

    Resolved Issues

    The following table lists the resolved issues in VidyoReplay version 20.1.0:

    VidyoReplay Version 20.1.0 - Resolved Issues
    Key Summary
    RPLY-1242 Enghouse Vidyo fixed a logging issue where a particular function would keep writing log files if a physical server was present, and thereby unnecessarily fill up the server. 
    RPLY-1224 Enghouse Vidyo corrected an issue where recorded audio included clicking sounds during playback. This impacted customers using VidyoRoom systems with H.323 or SIP endpoints while sharing content using an Inogeni device.
    RPLY-1222 The max recording duration was increased to 12 hours. 
    RPLY-1220
    When recording a conference in 1080p resolution, VidyoReplay once again supports the "Conference & Application" recording mode.
    RPLY-1190
    VidyoReplay once again supports recording shared content at CIF resolution.

     

    Known Issues

    There are no new known issues in VidyoReplay version 20.1.0. Refer to the Known Issues section below to view known issues for prior releases.
     

    Compatibility

    VidyoReplay version 20.1.0 is compatible with VidyoPortal versions 18.4.x or later. 

    If your organization has an on-premises VidyoPortal (rather than a cloud subscription), refer to the Vidyo Compatibility Matrix article to determine which endpoint versions are compatible with your VidyoReplay release.

     

    VidyoReplay: About Version 19.1.0

    What's New in This Release

    • Performance, Stability, and Security Improvements
      • Major platform Operating System (OS) update
        • Enghouse Vidyo performed a major platform OS update, thereby enhancing the  performance, stability, and security of VidyoReplay.
        • Additional benefits include:
          • Built-in system snapshot support which allows easy rollback of system updates and configuration changes.
          • Updates to most third-party libraries.
          • Continual security updates to the underlying OS.
          • Streamlined patching of third-party software components.
    • VidyoReplay 19.1.0 Open Virtual Appliance (OVA) in VMware
      • On-premises customers can directly deploy VidyoReplay version 19.1.0 as an Open Virtual Appliance (OVA) in VMware instead of upgrading manually.
    • New Vidyo System Console
      • The Vidyo System Console offers the same functionality as it always has, but with a whole new look and feel, so you can now more easily and quickly access all the features you’ve come to expect.
        • Here’s an example of the System Console interface with VidyoReplay version 19.1.0 and later:
          VidyoConsole_Main_Screen.png
    • VidyoReplay Admin Guide
      • For more information about how to use the new Vidyo System Console and the updated Super Admin interface, refer to version 19.1.0 of the VidyoReplay Administrator Guide.
    • Resolved Issues 
      • In this release, we've resolved a number of issues for improved stability and usability. To learn more, refer to the Resolved Issues section below. 

    Files 

    This file... Is for...
    rp-TAG_RP_19_1_0_239-upgrade-signed.vidyo
    		 VidyoReplay version 19.1.0

     

    Important Notices

    • You must upgrade to VidyoReplay version 19.1.0  from VidyoReplay version 3.1.5 (03). Therefore, if you have a VidyoReplay version earlier than 3.1.5 (03), you must first upgrade to 3.1.5 (03) and then upgrade to version 19.1.0. Next, refer to the below "Upgrade a VidyoReplay 3.1.5 Cluster to 19.1.0" section to upgrade from VidyoReplay 3.1.5 to version 19.1.0. These steps must be completed in order.  
    • IMPORTANT NOTE: For security reasons, Vidyo strongly recommends moving your SSH port to the standard 22 which is in the privileged port range. When upgrading from VidyoReplay version 3.1.5 to 19.1.0, your port will be automatically reset to the standard SSH port 22. If you previously had SSH configured to port 2222, you should ensure that you update your firewall rules (if applicable) prior to upgrade.
    • IMPORTANT NOTE: If you have installed a previous VidyoReplay version 19.1.0 beta, you should first downgrade your VidyoReplay to 3.1.5, and then upgrade directly to the GA 19.1.0 version.
    • Before upgrading, please review the below “Notable Changes” section since there are several functional changes between VidyoReplay version 3.1.5 and 19.1.0. 

    Upgrade a VidyoReplay 3.1.5 Cluster to 19.1.0

    To upgrade a 3.1.5 cluster to 19.1.0, you must perform the following steps in order: 

    1. Place all Cluster Nodes into Maintenance mode.
    2. Upgrade all the Cluster Nodes.
    3. When the Cluster Node upgrades are completed and back online, then upgrade the current Standby Controller.
    4. When the Standby Controller upgrade is complete, proceed to upgrade the Active Controller.
      The previous Standby Controller will now become the 19.1.0 Active Controller.
    5. When the former 3.1.5 Active Controller completes its upgrade, it will then become the 19.1.0 Standby Controller.

      If you do not perform the above steps in order; there will be cluster instability and/or configuration loss.

    For more information on upgrading VidyoReplay from one version to another, refer to the Upgrade Steps Lookup Tool article. This article lists the steps you need to take for your particular version, including which Security Updates you may or may not need to install.

    Notable Changes

    The following list includes notable changes for VidyoReplay versions 19.1.0 and earlier:

    • Content Share Recording Profiles No Longer Supported in CIF Resolution
      • You must use SD resolution or higher for Content Share recording profiles since recording content shares at CIF resolution is no longer supported at this lower resolution.  
    • Import Certificate Bundles with a .p7b or .pfx File
      • To import certificate bundles, you must import with a standard .p7b, or .pfx file as VidyoReplay version 19.1.0 no longer supports a .vidyo security bundle file. 
    • Audio-Only Participants
      • When an audio-only participant joins a call, their name now displays in a tile. Previously, an audio-only participant did not display a tile or name.
    • Participant Labels
      • Participant labels are now captured in recordings. Previously, participant labels were not preserved in recordings.
    • UI Updates in the VidyoReplay Super Admin Interface
      • Migrate local recordings with ease from the VidyoReplay Super Admin interface General tab.
        • Instead of migrating local recordings from the System Console, you can now simply go to the Settings > General tab on the VidyoReplay Super Admin interface and click the Migrate NAS button to migrate your local recordings. 
          Super_Admin_General_Tab_Vidyo.png
          General Tab
      • Place nodes into Maintenance mode all in one place on the VidyoReplay Super Admin interface Cluster tab rather than on the Maintenance tab.
        • From the Component Status link on the Cluster tab, you can turn Maintenance mode on or off per node as well as view details about each component including Status (up, online, or maintenance), Local IP Address, NAS Status (up or down), number of Calls, and Actions (Maintenance mode on or off).
          • NOTE: The High Availability subtab is no longer available; however, you can still invoke the “force standby mode” by rebooting the server and then the standby controller will take over the virtual IP.
            ARTICLE_CLUSTER.png
            Component Status Subtab on the Cluster Tab
      • Upgrade your VidyoReplay quickly and easily from the Maintenance tab without first having to switch your system into Maintenance mode. 
        • NOTE: In this release, the Switch to Maintenance mode button was removed from this tab.
          ARTICLE_MAINTENANCE.png

    Resolved Issues

    The following table lists the resolved issues in VidyoReplay version 19.1.0:

    VidyoReplay Version 19.1.0 - Resolved Issues
    Key Summary
    RPLY-1094 Enghouse Vidyo fixed an issue that prevented videos set as "Public" from being viewed by users who were not logged in. Public videos can now be viewed by any users who navigate to the appropriate VidyoReplay URL.
    RPLY-1089 Enghouse Vidyo fixed an issue where after a Disaster Recovery flip of the VidyoPortal, the VidyoReplay’s would not re-register.
    RPLY-943
    Enghouse Vidyo fixed an issue where customized logos were not applied. Customized logos in accepted formats now appear as expected.
    RPLY-931
    Enghouse Vidyo fixed an issue where, in some cases, customers were unable to export a security bundle from version 3.1.4.
    RPLY-930 Enghouse Vidyo fixed an issue with the RecordsSearch API where both dateCreated and endTime were returning similar values for recordings created between 12pm-1pm and 12am-1am.
    RPLY-898 Enghouse Vidyo addressed an issue where if one recording terminated early it could affect other recordings on the same VidyoReplay.
    RPLY-887 Enghouse Vidyo updated the VidyoReplay 19.1.0 OVA so it deploys correctly on VMWare ESX 6.5.
    RPLY-718 Enghouse Vidyo fixed text errors that were present when an email was created to share a VidyoReplay link from the VidyoReplay library. The "\n" that was previously added to the links no longer appears.
    RPLY-649 Enghouse Vidyo made stability improvements so now recordings do not stop unexpectedly.
    RPLY-637 Enghouse Vidyo resolved an issue where muting the video during content sharing caused the last video frame to remain frozen in the small tile. With this fix, the small tile displays the content correctly when muting the video when sharing. 

     

    Known Issues

    There are no new known issues in VidyoReplay version 19.1.0. Refer to the Known Issues section below to view known issues for prior releases. 

    Compatibility

    VidyoReplay version 19.1.0 is compatible with VidyoPortal versions 18.4.x or later. 

    If your organization has an on-premises VidyoPortal (rather than a cloud subscription), refer to the Vidyo Compatibility Matrix article to determine which endpoint versions are compatible with your VidyoReplay release.

     

    2019 Releases

     

    VidyoReplay: About Version 3.1.5 (03)

    Important Notices

    • As a reminder, starting with VidyoReplay version 3.1.4, for security reasons, support for mounting NAS’s over SMBv1 has been deprecated. Before upgrading, please ensure that your NAS supports SMBv2.1 or later.
    • For information on how to upgrade to VidyoReplay version 3.1.5 (03) from the version you are currently running, refer to the Upgrade Steps Lookup Tool article. This article lists the steps you need to take for your particular version, including which Security Updates you may need to install.

    What's New in This Release

    • Resolved Issue 
      • This release resolved an issue to address a security vulnerability. This vulnerability could allow an authenticated user to elevate their privileges through the web interface. If exploited, VidyoReplay data could be accessible to such user. This data includes, but is not limited to, the following:
        • Recordings
        • SSL certificates
        • Configuration information
      • Please note that Vidyo is not aware of any exploitation of this vulnerability.
      • To address this issue, Vidyo has released VidyoReplay version 3.1.5(03). We strongly advise you to download rp-TAG_RP_3_1_5_03-signed.vidyo and upgrade your VidyoReplay. For instructions about how to upgrade, refer to the "Upgrading Your VidyoReplay" section of the VidyoReplay Administrator Guide. Installing version 3.1.5 (03) restarts VidyoReplay; therefore, any on-going recordings will be dropped.

    Compatibility

    VidyoReplay version 3.1.5 (03) is compatible with VidyoPortal versions 3.4x, 17.x, 18.x, and 19.x.

    Resolved Issue

    The following table lists the resolved issue in VidyoReplay™ version 3.1.5 (03):

    VidyoReplay Version 3.1.5 (03) - Resolved Issues
    Key Summary
    RPLY-1030 Vidyo fixed an access control issue which allows an authenticated user to elevate their privilege level.

     

    Known Issues

    There are no new known issues in VidyoReplay version 3.1.5 (03).

     

    2018 Releases

     

    VidyoReplay: About Version 3.1.5

    What's New in This Release

    • Fixed Issues 
      • This release resolves the two webcast issues listed in the Resolved Issues section below.

    Important Notices

    • For information on how to upgrade to VidyoReplay version 3.1.5 from the version you are currently running, refer to the Upgrade Steps Lookup Tool article. This article lists the steps you need to take for your particular version, including which Security Updates you may need to install.
    • As a reminder, starting with VidyoReplay version 3.1.4, for security reasons, support for mounting NAS’s over SMBv1 has been deprecated. Before upgrading, please ensure that your NAS supports SMBv2.1 or later.

    Compatibility

    VidyoReplay version 3.1.5 is compatible with VidyoPortal versions 18.1.x, 18.2.x, and 18.3.1.

    Resolved Issues

    The following table lists the resolved issues in VidyoReplay™ version 3.1.5:

    VidyoReplay Version 3.1.5 - Resolved Issues
    Key Summary
    RPLY-934 Webcast links accessed before the start of a webcast no longer result in an application exception.
    RPLY-929 Users can now view webcasts that are PIN-protected.

     

    Known Issues

    There are no new known issues in VidyoReplay version 3.1.5.

     

    VidyoReplay: About Version 3.1.4 (05)

    Important Notices

    • To further strengthen security within VidyoReplay™, version 3.1.4 (05) deprecates support for mounting NAS’s over SMBv1. Therefore, if you use VidyoReplay, Vidyo highly recommends that you upgrade to this version. Before upgrading, ensure that your NAS supports SMBv2.1 or later.
    • For information on how to upgrade to VidyoReplay version 3.1.4 (05) from the version you are currently running, refer to the Upgrade Steps Lookup Tool article. This article lists the steps you need to take for your particular version, including which Security Updates you may need to install.

    What's New in This Release

    • Platform Updates 
      • This release applies platform updates to the VidyoReplay appliance to improve security and performance.
    • Resolved Issues 
      • This release resolved a number of issues for enhanced system stability, security and usability.

    Resolved Issues

    The following table lists the resolved issues in VidyoReplay™ version 3.1.4 (05):

    VidyoReplay Version 3.1.4 (05) - Resolved Issues
    Key Summary
    RPLY-916 Users can no longer bypass PIN protection on public videos. This only occurred in rare circumstances.
    RPLY-914 Recordings now start when the system is in Federal Information Processing Standard (FIPS)-mode.
    RPLY-896 The authenticated downloading of recordings no longer gets rejected via the authenticated wget workflow.
    RPLY-888 The application now properly discards un-sanitized input. This only occurred in certain cases.

     

    Known Issues

    There are no new known issues for this release. 

     

    VidyoReplay: About Version 3.1.3 (02)

    Important Notices

    • To further strengthen security within VidyoReplay™, version 3.1.3 (02) deprecates support for mounting NAS’s over SMBv1. Therefore, if you use VidyoReplay, Vidyo highly recommends that you upgrade to this version. Before upgrading, ensure that your NAS supports SMBv2.1 or later.
    • For information on how to upgrade to VidyoReplay version 3.1.3 (02) from the version you are currently running, refer to the Upgrade Steps Lookup Tool article. This article lists the steps you need to take for your particular version, including which Security Updates you may need to install.
    • To avoid security vulnerabilities, VidyoReplay version 3.1.2 or later does not allow you to download recordings via GNU Wget. No other script-based or API alternatives exist at this time; however, we will notify you if these become available.

    What's New in This Release

    • Platform Updates 
      • This release applies platform updates to the VidyoReplay appliance to improve security and performance.

    Resolved and Known Issues

    There are no new resolved or known issues reported in this release.

     

    VidyoReplay: About Version 3.1.3 (01)

    Important Notice

    For information on how to upgrade to VidyoReplay version 3.1.3 (01) from the version you are currently running, refer to the Upgrade Steps Lookup Tool article. This article lists the steps you need to take for your particular version, including which Security Updates you may need to install. Once VidyoReplay is updated to version 3.1.3, a downgrade is not possible.

    What's New in This Release

    • Resolved issues
      • This release fixes the following issues to enhance the reliability and usability of VidyoReplay:
        • The VidyoReplayContentManagementService API is now working as intended.
        • The RecordsSearchRequest API now retrieves the correct number of video recordings in the system depending upon which filters are applied.

    VidyoReplay 3.1.3 is compatible with VidyoPortal versions 3.3.x, 3.4.x, and 17.1.x.

    Resolved Issues

    The following table lists the resolved issues in VidyoReplay™ version 3.1.3 (01):

    VidyoReplay Version 3.1.3 - Resolved Issues
    Key Summary
    RPLY-880 The VidyoReplayContentManagementService API is now working as intended.
    RPLY-870 The RecordsSearchRequest API now retrieves the correct number of video recordings in the system depending upon which filters are applied.

     

    Known Issues

    The following table lists the known issues in VidyoReplay version 3.1.3 (01):

    VidyoReplay Version 3.1.3 - Known Issues
    Key Summary
    RPLY-672 When using Internet Explorer® or Firefox® to view recordings, video noise displays every 10 seconds.

    Workaround: Use a different web browser to view the video recordings.
    RPLY-653 Occasionally after VidyoPortal™ failover, VidyoReplay is no longer able to register prefixes until it is restarted.
    RPLY-637 When sharing content, muting video causes the last video frame to remain frozen in the small tile.
    RPLY-610 The clipboard does not display correctly in the VidyoReplay Library and nothing happens upon clicking it.
    RPLY-597 When recording a conference with two participants in which one participant has privacy mode enabled, a still image of the participant who does not have privacy mode enabled remains in the recording after they disconnect.
    RPLY-595 A black screen displays when playing back recordings that are under ten seconds.
    RPLY-581 When using Internet Explorer 10 or 11 to view video recordings, pixelation may appear on the bottom of the video.

    Workaround: Use a different web browser to view the video recordings.
    RPLY-446

    During a call, the number of participants on the Call Status page drops to zero when the camera is set to privacy mode.

    Workaround: Use the Admin portal, Super portal, Control Meeting, or Participant List to view the correct number of participants on the call.
    RPLY-306 When a room owner starts a webcast, their name does not display in the Participant List.

     

    VidyoReplay: About Version 3.1.2

    Important Notice

    For information on how to upgrade to VidyoReplay version 3.1.2 from the version you are currently running, refer to the Upgrade Steps Lookup Tool article. This article lists the steps you need to take for your particular version, including which Security Updates you may need to install. Once VidyoReplay is updated to version 3.1.2, a downgrade is not possible.

    What's New in This Release

    • Security vulnerability issues
      • VidyoReplay version 3.1.2 fixes the following vulnerabilities:
        • Cross Site Request Forgery (CSRF) vulnerabilities in the VidyoReplay Admin UI.
        • A cross-site scripting security vulnerability that allows a user to execute Javascript on the    browsers of users accessing the application.

    VidyoReplay 3.1.2 is compatible with VidyoPortal versions 3.3.x and 3.4.x.

    Resolved Issues

    The following table lists the resolved issues in VidyoReplay™ version 3.1.2 (46):

    VidyoReplay Version 3.1.2 - Resolved Issues
    Key Summary
    RPLY-780 Cross Site Request Forgery (CSRF) vulnerabilities in the VidyoReplay Admin UI are now fixed.
    RPLY-769 A cross-site scripting vulnerability, which allows a user to execute Javascript on the browsers of users accessing VidyoReplay, is now fixed.

     

    Compatibility

     

    Internet Browser Compatibility 

    Internet Explorer®: 

    • Important: When upgrading the VidyoReplay using Internet Explorer, please use version 10 or later. Alternatively, you can use another browser, such as Chrome or Firefox.
    • IE 10 and 11 are supported in non-compatibility modes.   

    Version Compatibility   

    If your organization has an on-premises VidyoPortal (rather than a cloud subscription), refer to the Vidyo Compatibility Matrix article to determine which endpoint versions are compatible with your VidyoReplay release.

    If you are using VidyoGateway version 3.5.x, please read the note below.

    If you are using this release of the VidyoPortal and VidyoRouter with VidyoGateway version 3.5.x, please note that if the conference moderator or a participant mutes the video of another participant in the call, all legacy participants in the call will see the last frozen frame of the participant whose video was muted.

    This issue has been resolved in VidyoGateway version 4.2 and later.

     

     

    Known Issues

     

    The following table lists the issues that still remain, but you can be sure our teams are working hard to fix them:

    VidyoReplay - Known Issues
    Key Summary
    RPLY-1335
    If using a password-based transport (SCP, FTP, SFTP), Automatic Recording Export fails if the password contains an exclamation mark.
    RPLY-1333
    When using the Automatic Recording Export feature, metadata is exported.
    RPLY-1323
    When using the Test Connection script, the TestConnection button returns "Cannot establish connection." In addition, if embedded metadata is set in the web page, it is saved as export.metadata.format=None, but the export.sh script checks for none (without the capital N).
    RPLY-1282
    Content share is not recorded if the recording profile is set to 1 as the maximum number of participants.
    RPLY-610 The clipboard does not display correctly in the VidyoReplay Library and nothing happens upon clicking it.
    RPLY-446

    During a call, the number of participants on the Call Status page drops to zero when the camera is set to privacy mode.

    Workaround: Use the Admin portal, Super portal, Control Meeting, or Participant List to view the correct number of participants on the call.
    RPLY-306 When a room owner starts a webcast, their name does not display in the Participant List.

     

Was this article helpful?
0 out of 0 found this helpful

Related articles

Comments

2 comments

Sort by Date Votes
  • Avatar
    Permanently deleted user

    Our Vidyoreplay is currently 3.1.5(02), do we need to get 3.1.5(03)?

    0
    Comment actions Permalink
  • Avatar
    Jodi Sergeant

    Hi John,

    Please upgrade to 3.1.5(03) since a security issue was resolved. Let me know if you have further questions. Thank you.

    0
    Comment actions Permalink

Please sign in to leave a comment.