Partners Blog Contact Us

Switching to Maintenance Mode and Upgrading Your Standby VidyoPortal

Follow

If you put your Standby VidyoPortal into Maintenance mode, the Settings > Hot Standby screens do not display when accessed via the Internet Explorer Web browser.

 

To switch to Maintenance mode and upgrade your Standby VidyoPortal:

  1. Open a new System Console and access the Standby VidyoPortal using the Native IP or FQDN address.

    For more information, see Preparing Specific IP and FQDN Values for Your VP1, VP2, and Cluster.

    Press the Enter key after each prompt.



  2. Put the Standby VidyoPortal into Maintenance mode using the following steps:

  3. Enter m > H from the main menu to access the Standby VidyoPortal’s Hot Standby

  4. Enter C to select the Maintenance Mode option.

  5. Enter y to confirm putting your Standby VidyoPortal into Maintenance mode.



    Alternatively, you can put the Standby VidyoPortal into Maintenance mode via the Super Admin Portal by navigating to Settings > Hot Standby > Status, clicking Switch to Maintenance, and then clicking Yes in the confirmation pop-up that displays.

  6. Upgrade the Standby VidyoPortal as described in the Upgrading Your VidyoPortal System Software.

    The VidyoPortal automatically reboots.

    Wait until the machine has completely rebooted before proceeding.



  7. Open a new System Console and return to the Standby VidyoPortal using the Native IP or FQDN address.

    For more information, see Preparing Specific IP and FQDN Values for Your VP1, VP2, and Cluster.

    Press the Enter key after each prompt.



  8. Take the Standby VidyoPortal out of Maintenance mode using the following steps:

  9. Enter m > H from the main menu to access the Standby VidyoPortal’s Hot Standby

  10. Enter C to select the Maintenance Mode option.

  11. Enter y to confirm putting your VidyoPortal back into Standby mode.

    If desired, you may leave the System Console for your Standby VidyoPortal open as you continue to the next procedure.
Was this article helpful?
0 out of 0 found this helpful

Comments

0 comments

Please sign in to leave a comment.