Partners Blog Contact Us

Enabling OCSP in the VidyoPortal and VidyoRouter and Configuring OCSP in the VidyoPortal

Follow

Enabling OCSP is done the same way for VidyoPortal and VidyoRouter. For the VidyoPortal, you must enable OCSP and then perform some additional configuration to enable OCSP for each application (VidyoGateway and VidyoRouter).

To enable OCSP in the VidyoPortal or VidyoRouter:

  1. Log in to the Super Admin portal or your VidyoRouter.

  2. Click the Settings tab.

    The License page displays by default.

  3. Click  to the left of Security on the left menu.

  4. Click Advanced from the submenu.

    The Advanced page displays.

    EnablingOCSP_VP_VR.png

  5. Select the Enable OCSP.

  6. Select the Override CA OCSP Responder checkbox and enter the IP or FQDN address of the new responder in the Responder URL field if you want to override the OCSP responders specified in the Client, Intermediate, and Root certificate.

  7. Click Save OCSP Settings.

    The server must have access to the OCSP Responders specified in the certificates or the overridden Responder. Also, be sure that the configured DNS server can resolve the FQDNs of all the OCSP Responders.



To configure OCSP for your applications in the VidyoPortal:

  1. Log in to the Super Admin portal using your Super Admin account.

    For more information, see Logging in to the Super Admin Portal Logging in to the Super Admin Portal.

    The Components page displays by default.

  2. Click the Settings tab.

    The License page displays by default.

  3. Click  to the left of Security on the left menu.

  4. Click Applications from the submenu.

    The Applications page displays.

  5. Look in the Applications column for the application for which you want to enable OCSP, and then select the checkbox in the OCSP column for that application.

    OCSP should not be enabled for the User portal. If it is enabled, VidyoRooms will no longer function correctly.



  6. Click Save.

    Changes are applied immediately; therefore, if OCSP verification is required for the Super application, you will be immediately prompted for your client certificate.
Was this article helpful?
0 out of 0 found this helpful

Comments

0 comments

Please sign in to leave a comment.