Partners Blog Contact Us

Entering General VidyoManager Information


To enter general VidyoManager information:

  1. Log in to the Super Admin portal using your Super Admin account.

    For more information, see Logging in to the Super Admin Portal.

    The Components page displays by default.

  2. Double-click on the blue link in the Name column for the VidyoManager component.

    The VidyoManager pop-up displays.


  3. View and enter the following information:

    • The ID shows your VidyoManager ID, which is automatically created and set by the system. This value cannot be changed.

    • Enter a display name or label for your VidyoManager in the Display Name field.

      These address and port values are then used by VidyoDesktop, VidyoRoom, and VidyoGateway clients to communicate with your VidyoManager.

    • The Management URL shows the address the VidyoManager uses to communicate with the VidyoPortal.

      Do not change this address.

    • Enter the appropriate port in the EMCP Port field.

      Do not change the address value unless required for NAT traversal or enabling Security.

      Before editing the EMCP settings, see the Firewall and Network Address Translations (NAT) Deployments and Security sections.

      If you’re using FQDN licensing, the EMCP address is read-only.

    • The SOAP Port field allows your VidyoPortal to communicate with your VidyoManager.

    • The RMCP Port field allows your VidyoRouter to connect to the VidyoManager.

    • Enter the appropriate FQDN in the FQDN field.

    • The DSCP value will be used for VidyoManager connections.

  4. Click Save.
Was this article helpful?
0 out of 0 found this helpful



Please sign in to leave a comment.