Partners Blog Contact Us

Validating the Security Keys

Follow

Continue your Hot Standby configuration by validating the security keys on VP1 and VP2.

To validate the security keys:

  1. Open a new (or return to an already open) System Console for VP1 using the Cluster IP or FQDN address.

    For more information, see Preparing Specific IP and FQDN Values for Your VP1, VP2, and Cluster.

    Press the Enter key after each prompt.



  2. Enter D from the System Console Node Synchronization menu on VP1 to validate the security key.

    The message Validating security...[Success] displays indicating that VP1 has validated the security key from VP2.



  3. Press any key.

    If desired, you may leave the VP1 System Console open as you continue to the next step.

  4. Open a new (or return to an already open) System Console for VP2 using the Native IP or FQDN address.

    For more information, see Preparing Specific IP and FQDN Values for Your VP1, VP2, and Cluster.

  5. Enter m > H > F from the main menu to access VP2’s Node Synchronization Menu.

  6. Enter D to validate the security key.

    The message Validating security...[Success] displays indicating that VP2 has validated the security key from VP1.

    If desired, you may leave the VP2 System Console open as you continue to the next procedure.
Was this article helpful?
0 out of 0 found this helpful

Comments

0 comments

Please sign in to leave a comment.