The FQDN on your VidyoRouter is set up using the following procedure.

 

To set the FQDN on your VidyoRouter Configuration pages:

  1. Log in to your VidyoRouter using your System Console account.

    The URL of your VidyoRouter is typically a domain name: http://[IP or FQDN address]/vr2conf. You can also click the VidyoRouter IP address on the Components tab in your VidyoPortal.

    For more information, see Logging in to the system console of your server and changing the default password.

    Although the default username for this page is admin, only the Super Admin accesses these pages.



    The VidyoRouter Configuration Pages display.

  2. Set the Configuration Server to a valid FQDN of the VidyoPortal on the Basic tab as defined by the applied certificate.

    Setting_the_FQDN_on_Your_VidyoRouter_Configuration_Pages_1.png

    The best practice is to provide a full URL for your Config Server value beginning with https://, using your IP or FQDN address, and even a port reference if desired.



  3. Click Apply.

  4. Click OK to restart the VidyoRouter.

  5. Proceed and set the FQDN on your tenants.
Was this article helpful?
0 out of 0 found this helpful

0 Comments

Follow
Please sign in to leave a comment.