To upgrade the system using an image file from the local disk, you must first upload the upgrade image using the Admin UI Firmware tab. You can then reboot the server to access the Recovery Console and perform the upgrade.

For more information about how to use the Admin UI Firmware tab, see Updating the Firmware.

 

To upgrade the system using an image file from the local disk:

  1. Enter 1 to select the Upgrade System option.

  2. Press the Enter key on your keyboard to select OK.

    Upgrading_the_System_Using_an_Image_File_from_the_Local_Disk_1.png

    The System Upgrade window displays.

  3. Select the Local Load Software from the Local Disk option.

  4. Press the Enter key on your keyboard to select OK.

    Upgrading_the_System_Using_an_Image_File_from_the_Local_Disk_1.png

    The File Selection window displays with a list of available image files.

  5. Select the file you want to use to upgrade the system and select OK.

    Upgrading_the_System_Using_an_Image_File_from_the_Local_Disk_2.png

    A message appears asking you to confirm the upgrade, and then another message appears as the system validates the file.

    LocalDisk.png

    The new image file is applied to the VidyoRoom or VidyoPanorama 600 system.
Was this article helpful?
0 out of 0 found this helpful

0 Comments

Follow
Please sign in to leave a comment.