To configure the video settings:

  1. Click the Settings tab.

    Configuring_the_Video_Settings_1.png

  2. Click the blue triangle next to the word Video to view the video settings if needed.

  3. Select the camera that the VidyoRoom or VidyoPanorama 600 will use from the Cameras drop-down.

  4. Select one of the Transmit Bandwidth radio buttons to set the maximum video transmit bandwidth.
    The options available depend upon the VidyoRoom model.

  5. Select one of the Transmit Resolution radio buttons to set the video transmit resolution.
    The options available depend upon which Transmit Bandwidth you selected.

  6. Select one of the Transmit Framerate radio buttons to set the frames per second of the camera.
    The options available depend upon which Transmit Bandwidth you selected.

  7. Click Apply Transmit Settings.

  8. Do any of the following for Camera Control if necessary:

    • Click Reset Camera to reset the camera.
    • Click Backlight On or Backlight Off as needed to compensate for backlighting.

  9. Select one of the following Anti-Flicker Mode radio buttons:

    • Select the 50Hz radio button if your VidyoRoom or VidyoPanorama 600 system is located in Europe
    • Select the 60Hz radio button if your system is located in North America
    • Select the Off radio button to turn Anti-Flicker Mode off

  10. Select the Auto-reboot if INOGENI is not detected checkbox if you have a VidyoRoom HD-40 Revision B system with an INOGENI device.
Was this article helpful?
0 out of 0 found this helpful

0 Comments

Follow
Please sign in to leave a comment.