The Settings menu enables the VidyoRoom or VidyoPanorama 600 system administrator to configure the system and can be accessed anytime (pre-call or in-call).
To configure the system settings:
- Press Settings on your remote control (press twice if you are in a call).
The Settings menu displays.
- Select any of the following icons on the Settings menu to access the settings for that screen:
Enables you to enter values for the VidyoPortal, username, and password.
Enables you to turn your proxy ON or OFF and specify UDP range values as desired.
Your VidyoRoom or VidyoPanorama 600 is set to USE DHCP by default. This enables it to automatically obtain its IP address.
If you want to change the disabled network settings, turn DHCP OFF and provide values for IP Address, Subnet, Gateway, and DNS.
|Enables you to select a microphone, adjust the microphone level, select from available speakers, adjust the speaker volume, turn join and exit sounds or navigation sounds ON or OFF, and turn echo cancellation ON or OFF.|
|Enables you to select a camera source, select the video quality, select a shared content source, turn the backlight ON or OFF, and reset the camera position.|
Enables you to select whether to automatically answer incoming calls, automatically share connected devices, allow remote users to control your camera, and turn the Lucky Clover keypad ON or OFF.
Note: If your VidyoRoom does not detect an IR remote, it automatically turns OFF the Lucky Clover keypad.
You can also set your Room's PIN, configure your system with an access code to PIN-protect your VidyoRoom or VidyoPanorama 600 settings, upload background images for display on the Settings menu, and set the language and time zone.
You can also select Reboot System on this screen to reboot your machine.
|Displays the VidyoRoom and VidyoPanorama 600 version being used, the Vidyo company description, and the copyright statement.|